Rubber Valve TR 412, 100 piece
• packaging unit: 100 piece
TR 412 rubber parts manufactured according to DIN 7780, with dust cover, (ready assembled) MADE IN GERMANY.
Can be used for tubeless tires for passenger cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle - 25 °. If this is not ensured by the wheel cap or other supports, the rubber valve must not be installed. In such cases, we recommend the use of metal valves.
For storage in accordance with DIN 7716, the storage is recommended up to 24 months after delivery date. Caution: For even more safety and against gas-tight replace the standard plastic dust caps with metal caps.
• Length: 33 mm
• Valve hole: 11.3 mm
• Maximum working pressure: 4.5 bar / 65 PSI at room temperature
• Maximum axial draw-in torque: 600 Nm
• Packing unit: 100 pieces
TR 412 rubber parts manufactured according to DIN 7780, with dust cover, (ready assembled) MADE IN GERMANY.
Can be used for tubeless tires for passenger cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle - 25 °. If this is not ensured by the wheel cap or other supports, the rubber valve must not be installed. In such cases, we recommend the use of metal valves.
For storage in accordance with DIN 7716, the storage is recommended up to 24 months after delivery date. Caution: For even more safety and against gas-tight replace the standard plastic dust caps with metal caps.
• Length: 33 mm
• Valve hole: 11.3 mm
• Maximum working pressure: 4.5 bar / 65 PSI at room temperature
• Maximum axial draw-in torque: 600 Nm
• Packing unit: 100 pieces
