Rubber Valve TR412 with metal cap, 100 piece
• packaging unit: 100 piece
Manufactured according to DIN 7780, with metal cap, (ready assembled)
We supply our valves under the quality criterion MADE IN GERMANY.
Can be used for tubeless tires by passenger cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle 25 °. If this is not ensured by the wheel cap or other supports, the rubber valve must not be installed. In such cases, we recommend using metal valves.
For storage in accordance with DIN 7716, the storage is recommended up to 24 months after delivery date.
Caution: For even more safety, replace the standard dust caps made of plastic with gas-tight metal caps (071312).
• Length: 33 mm
• Valve hole: 11.3 mm
• Maximum working pressure: 4.5 bar / 65 PSI at room temperature
• Maximum axial draw-in torque: 600 Nm
• Packing unit: 100 pcs.
Manufactured according to DIN 7780, with metal cap, (ready assembled)
We supply our valves under the quality criterion MADE IN GERMANY.
Can be used for tubeless tires by passenger cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle 25 °. If this is not ensured by the wheel cap or other supports, the rubber valve must not be installed. In such cases, we recommend using metal valves.
For storage in accordance with DIN 7716, the storage is recommended up to 24 months after delivery date.
Caution: For even more safety, replace the standard dust caps made of plastic with gas-tight metal caps (071312).
• Length: 33 mm
• Valve hole: 11.3 mm
• Maximum working pressure: 4.5 bar / 65 PSI at room temperature
• Maximum axial draw-in torque: 600 Nm
• Packing unit: 100 pcs.
